mechanical Engineering  and Quality Control
Where ideas with decision are engineered to precision...
Contact details:
  110 Brenchley Dve,
 

Atwell, 6164   WA

Phone: (08) 9414 5960
Mobile: 0418 905 602
E-mail: enquiries@meqc.com.au 
DESIGNING - PROTOTYPING - MANUFACTURING - TESTING - EVALUATION - RESEARCH SUPPORT - CONCEPTUAL DESIGN

Lifting Platform SF 1000-1

SF 1000-1 lowered

The SF 1000-1 is an ideal solution where temporary wheelchair access is required to stages or mezzanine levels in schools, theatres, village halls etc. The platform can be easily moved by two people and is suitable for indoor or outdoor applications. The design of the platform addresses all the relevant requirements of the Australian Standard AS 1735.14-1998 and Disability (Access to Premises – Buildings) Standard 2010.
The platform is for wheelchair users only.

 

Minimum Dimensions

 
   
Load Capacity - 190 kg Maximum.
Power - 240 V AC, 1 Amp/
  24 V DC, 10 Amp
Lift Width overall  - 1301 mm
Platform Working Width - 1101 mm
Platform Working Length -1400 mm
Platform length with ramp up - 1792 mm
Platform length with ramp down - 1921 mm
Lift Range - 115 mm to 1000 mm
   
Minimum Door Width Required - 550 mm
   
Weight and Materials  
   
Weight  - 98.5 kg
Materials:   
Outside - Aluminium
  Inside - Galvanized Steel
   
Other Dimensions  
   
Stowed Width - 1470 mm
Stowed Depth - 513 mm
Stowed Height - 1428 mm
   

The unit can be put on its side to minimise stowing area required.

The driving machine is a screw actuator, 24V DC.
The main actuator is of worm gear type. In the case of a power failure it will stop at the spot where the power interruption occurred.
 
The unit is operated using a hand held control. There are only two buttons to manipulate, so no prior knowledge is required.

To raise the lifting platform from its lowest level:
1. When lifting platform is at its lowest level, and the access ramp has been lowered to that level, the wheelchair user can drive into/up onto the lifting platform without hindrance.
2. Pressing UP button on the hand held controller continuously raises the access ramp; this then functions as a guard against rolling off.
3. When the access ramp has risen to its highest level, and if the UP button is is still being depressed, the platform will rise.
4. When the lifting platform is level with the landing, the platform stops automatically and the user can drive onto the landing.

To lower the lifting platform from its highest level:
1. The wheelchair user drives onto the lifting platform.
2. Pressing DOWN button on the hand held control lowers the lifting platform. The platform is activated for as long as the button is depressed.
3. When the lifting platform is at its lowest level, and if the DOWN button is still being depressed, the access ramp will be lowered and the user can drive off the lifting platform.

Warranty (brief):
ME&QC warrants that its lifting equipment is free from defects in materials and workmanship under normal use. ME&QC warrants that the lifting equipment itself will perform substantially in accordance with the specifications and the design intent of the lift.
The expressed warranties are made for a period of 365 days from the date the lifting equipment is delivered to you as the first user.
During that period ME&QC will replace any lifting equipment, which proves defective in materials or workmanship, without additional charge, on an exchange basis.


SF 1000-1 raised
SF 1000-1 stored

Home | Products | Custom Projects | Associated products | Contact details | Marine Engineering


  Copyright © I. Mironenko 2008 - 2016 Site by WebWest